3 Strand Twisted Polypropylene and Nylon Marine Rope PE Twine

1.PHOTOS

2. Main performance

3.Technology Comparison

Coil length: 220m

Spliced strength:± 10% lower

Weight and length tolerance:± 5%

MBL=Minimum Breaking Load conform ISO 2307

Other sizes available upon request

4.Parameter Table

Production Process of 3-Strand Twisted Polypropylene-Nylon Marine Rope with PE Twine

Step 1: Raw Material Preparation & Fiber Extrusion

• Polypropylene (PP) & Nylon Fiber Production: High-grade PP pellets (for water resistance and lightweight properties) and nylon pellets (for tensile strength and elasticity) are separately fed into extruders. Heated to 180–220°C (PP) and 250–280°C (nylon), the molten polymers are forced through spinnerets to form continuous filaments. These filaments are cooled with air/water, then drawn (stretched) to align molecules—boosting PP’s UV resistance and nylon’s load capacity.
• PE Twine Manufacturing: PE pellets are extruded into thin filaments, which are twisted into fine twine. The twine is heat-set to enhance abrasion resistance; it serves as a reinforcing component to strengthen the rope’s core or outer strands.

Step 2: Yarn Spinning (PP-Nylon Blending & PE Twine Integration)

• Strand Core Formation: To create each of the 3 main strands, a blend of PP and nylon filaments (typically 60–70% PP for lightness, 30–40% nylon for strength) is twisted together. During this process, PE twine is embedded into the strand’s core or wrapped around the PP-nylon blend—adding structural support and reducing strand fraying.
• Yarn Tension Calibration: The twisted PP-nylon-PE yarns are monitored for consistent tension; uneven tension would cause weakness in the final rope. Yarns are wound onto bobbins, ready for stranding.

Step 3: 3-Strand Twisting (Primary Construction)

• Strand Alignment: Three identical PP-nylon-PE yarn bobbins are mounted on a twisting machine, positioned to feed strands evenly. The machine rotates the bobbins in a controlled direction (e.g., "Z-twist" for marine ropes, a standard for stability), twisting the three strands together.
• Twist Rate Optimization: The twist rate (twists per meter) is set to balance flexibility and strength—too loose, and the rope unravels; too tight, and it becomes rigid. For marine use, a moderate twist rate (10–15 twists/m) is typical, ensuring the rope handles easily while withstanding wave-induced tension.

Step 4: Heat Setting & Surface Treatment

• Heat Stabilization: The twisted 3-strand rope is passed through a heat tunnel (80–120°C) to "set" the twist—preventing the strands from untwisting over time and locking in the PE twine’s reinforcing effect. This step also reduces residual stretch, critical for marine load consistency.
• Marine-Grade Coating (Optional): Some variants receive a water-based, UV-resistant coating. This coating enhances saltwater repellency, blocks UV degradation, and smooths the rope’s surface to reduce friction against boat hulls or docks.

Step 5: Quality Testing & Finishing

• Performance Testing: Ropes undergo tests for:
  • Tensile strength (to confirm load capacity for marine tasks).
  • Water absorption (PP’s low absorption is verified, as excess water adds weight).
  • Abrasion resistance (PE twine’s role in reducing wear is validated).
  • UV stability (exposed to simulated sunlight to check for brittleness).
• Cutting & Packaging: Passing ropes are cut to standard marine lengths (e.g., 20m, 50m, 100m), coiled to avoid kinks, and labeled with specifications (material blend, load rating). A final visual inspection ensures no frayed strands or uneven twisting before packaging.

2. Application Scope of 3-Strand Twisted Polypropylene-Nylon Marine Rope with PE Twine

Marine & Boating Core Applications

• Small Boat Mooring & Docking Lines
  Used for mooring small vessels (e.g., fishing boats, inflatable boats, jet skis) to docks or buoys. PP’s water resistance prevents weight gain from saltwater, nylon’s elasticity absorbs wave shocks (avoiding dock/boat damage), and PE twine resists wear from cleat friction. The 3-strand design is easy to tie into secure knots (e.g., cleat hitch, bowline).
• Dinghy/Tender Tow Lines
  Ideal for towing dinghies or tenders behind larger boats (e.g., yachts, sailboats). Its lightweight nature (from PP) reduces drag in water, while nylon’s strength handles the tender’s weight. PE twine adds durability, so the rope withstands occasional contact with rocks or shallow seabeds during towing.
• Anchor Lines for Lightweight Watercraft
  Suitable as anchor lines for small boats (e.g., canoes, kayaks, small sailboats) in calm to moderately rough waters. The 3-strand twist provides stable load distribution, while PP’s buoyancy (it floats) ensures the line stays visible on water—preventing accidental entanglement with propellers. Nylon’s stretch cushions sudden pulls from waves, keeping the anchor set.
• On-Deck Gear Securement
  Used to secure lightweight on-board gear (e.g., fenders, coolers, fishing nets) to boat railings or cleats. The rope’s flexibility allows it to wrap around irregularly shaped gear, and PE twine’s abrasion resistance prevents fraying from constant movement (e.g., wind, wave rocking). It is compact enough to store in small boat lockers.

Extended Marine & Recreational Applications

• Marine Fender Lines
  Attached to boat fenders (buoys that protect hulls from dock impact). The rope’s elasticity (from nylon) lets fenders absorb shocks without snapping, while PP’s resistance to saltwater ensures the line doesn’t degrade from constant water exposure. PE twine adds longevity, even with repeated fender movement.
• Swimming Area Markers
  Used to create temporary floating markers for swimming zones near boats or beaches. PP’s buoyancy keeps the rope visible on water, and the 3-strand design holds shape when tied to buoys. UV resistance (from PP and coating) ensures it lasts through summer seasons of sun exposure.
• Recreational Water Sports Gear
  Employed in light water sports, such as tying wakeboards or inflatable tubes to boat tow points (for casual use). Its strength handles the pull of riders, while its flexibility avoids kinking during towing. PE twine reduces wear from contact with water sports equipment.
• Small Commercial Marine Tasks
  Used in small-scale commercial operations, such as securing small fishing nets to boats or tying bait buckets to railings. The rope’s durability withstands daily use in saltwater, and its low cost (compared to all-nylon ropes) makes it economical for frequent replacement if needed.

Since its establishment in 2005, Qingdao Jincheng Maritime Technology Co., Ltd. has been steadily advancing in the maritime technology field for nearly two decades. The company focuses on the core business of manufacturing marine supplies, always adhering to the concepts of innovation and excellence, and is committed to providing comprehensive and high-quality products and services to the global maritime industry.

In terms of product manufacturing, the company has a rich and diverse product line, covering marine navigation equipment, marine safety protection supplies, marine interior decorations, and various functional accessories for ships. From precise navigation instruments to sturdy and durable life-saving equipment, from comfortable and beautiful cabin interiors to efficient and practical marine tools, every product undergoes strict quality control to ensure compliance with international standards and industry specifications.

The company attaches great importance to technological research and development and innovation. It has formed a research and development team composed of senior maritime engineers, professional technicians, and innovative talents. The team continuously explores cutting-edge technologies, actively introduces new materials and processes, and continuously optimizes product performance to meet the growing intelligent and green demands of the maritime industry. At the same time, the company has established long-term and stable cooperative relationships with many well-known domestic and foreign universities and scientific research institutions. Through the collaborative innovation of industry, university, and research, it accelerates the transformation of scientific research achievements and injects a continuous stream of impetus into the company's development.

With reliable product quality, advanced technological level, and a complete after-sales service system, Qingdao Jincheng Maritime Technology Co., Ltd. has won a good reputation and wide recognition in the industry. Its products not only sell well in major domestic ports and shipbuilding enterprises but also are exported to many countries and regions overseas. The company has established long-term cooperative relationships with many internationally renowned shipping companies. Looking to the future, the company will continue to forge ahead, continuously enhance its core competitiveness, and contribute to the advancement of maritime technology and the development of the global shipping industry.